welcome to visit nantong kecheng rubber machinery co., ltd website!
Label Navigation
KCM series internal mixer
KCM series internal mixer
Product Content
As a common extruder equipment, single screw extruder is used in the plastic raw material and profile extrusion processing industry. Usually the single-screw extrusion of the screw is divided into the conveying section of the extruder, compression section, metering section; according to the size of the screw diameter, pitch, depth to determine the effective length of the three sections, generally according to the 1/3 of division.
隐藏域元素占位
PLA polylactic acid corn starch degradation masterbatch granulator
Polylactic acid (Polylactic acid,PLA), also known as polylactide, is a polyester polymerized from lactic acid. Polylactic acid has excellent biodegradability, compatibility and absorbability. Polylactic acid is a non-toxic, non-stimulating synthetic polymer material, its raw material is lactic acid, mainly from starch (such as corn, rice) and other fermentation, can also be obtained from cellulose, kitchen waste or fish waste as raw materials.
隐藏域元素占位
Degradable plastics refers to a class of plastics whose products can meet the requirements of use and whose performance remains unchanged during the storage period, but can degrade to environmentally harmless substances under natural environmental conditions after use. Therefore, it is also called environmentally degradable plastic.
隐藏域元素占位
The screw rotates in the same direction, and their forces can be balanced with each other, thus achieving a high screw speed.
隐藏域元素占位
After the push-pull type twin-screw experimental unit, this set of units using PLC control, for extrusion granulation repeated experiments can be convenient to record, save experimental data, while the operation is more accurate.
隐藏域元素占位
News Content
Problems and Solutions of Wire and Cable in Extrusion Process
Problems and Solutions of Wire and Cable in Extrusion Process
隐藏域元素占位
The scope of application and the main configuration of the mixer!
The mixer is suitable for mixing, kneading and dispersing various chemical raw materials such as EVA, rubber, synthetic adhesive and hot melt adhesive. The experimental ratio formula is then put into the production line. This 3L mixer is a very practical machine is mainly used to test the raw materials and formula to be mixed evenly experimental mixer. The mixer is equipped with PLC man-machine interface control system, temperature module control system and heat transfer oil heating and cooling control system. It is not only beautiful, but also convenient and simple to operate. The main configuration of the fast mixer for heating and cooling is: main motor, frequency converter, Frequency converter, reducer, deceleration brake motor, high temperature oil pump, PLC control
隐藏域元素占位
What are the good ways to open the mill in mixing glue?
What are the good ways to open the mill in mixing glue?
隐藏域元素占位
Share the mechanical role of rubber in the mixer!
Share the mechanical role of rubber in the mixer!
隐藏域元素占位
Open mill introduction and cooling line safety operation procedures!
Open mill introduction and cooling line safety operation procedures!
隐藏域元素占位
Kecheng company will participate in the 2019 China International Rubber and Plastic Exhibition
Kecheng company will participate in the 2019 China International Rubber and Plastic Exhibition
隐藏域元素占位
Kecheng successfully participated in the Shanghai International Cable Exhibition
Kecheng successfully participated in the Shanghai International Cable Exhibition
隐藏域元素占位
Kecheng will participate in the 2018 International Cable Show (Wireshow)
Kecheng will participate in the 2018 International Cable Show (Wireshow)
隐藏域元素占位
Kecheng Successfully Held 2018 International Rubber and Plastic Exhibition
Kecheng Successfully Held 2018 International Rubber and Plastic Exhibition
隐藏域元素占位