吕工机械

Problems encountered in the extrusion process of wires and cables and their solutions

Problems encountered in the extrusion process of wires and cables and their solutions

2020-08-27

Share the mechanical action of the rubber in the internal mixer!

Because the surface of the rotor has spiral sharp edges, the gap between it and the mixing chamber is variable. The small gap is between the edge of the internal mixer rotor and the inner wall of the mixing chamber. When the rubber material passes through this small gap,

2020-04-18

What are the good methods for mixing rubber in the open mixer?

What are the good methods for mixing rubber in the open mill? Next, the editor of Karcher will explain to you:

2020-04-18

The scope and main configuration of the internal mixer!

The internal mixer is suitable for mixing, kneading, and dispersing various chemical raw materials such as EVA, rubber, synthetic rubber, and hot melt adhesive. Then put the experimental ratio formula into the production line. This 3L internal mixer is a very practical machine, mainly an experimental internal mixer that mixes the raw materials and formulas used in the experiment uniformly.

2020-04-18

Introduction of open mill and safety operation rules of cooling line!

Introduction of open mill and safety operation rules of cooling line!

2020-04-18

< 1 > 跳转到